How to Pair Soundcore Earbuds

How to Pair Soundcore Earbuds

Are you excited to dive into the world of wireless audio with your brand-new Soundcore earbuds? Well, you’re in for a treat! In this comprehensive guide, I’m going to walk you through the simple and hassle-free process of pairing your Soundcore earbuds with various devices. Whether you’ve got the latest Soundcore model or an older one, I’ve got you covered. So, grab your earbuds, and let’s get started on this journey to wireless freedom!

Get to Know Your Soundcore Earbuds

Before we dive into the pairing process, it’s a good idea to get familiar with your Soundcore earbuds. These nifty little gadgets come in various shapes and sizes, but they all share some common features:

  1. Physical Controls: Most Soundcore earbuds have physical buttons or touch-sensitive surfaces for controlling playback, volume, and calls. Familiarize yourself with these controls to make your user experience smoother.
  2. Charging Case: Soundcore earbuds typically come with a charging case. The case not only stores your earbuds but also charges them on the go. Make sure your earbuds are properly seated in the case when not in use to keep them juiced up.
  3. LED Indicators: Look for LED lights on your earbuds and charging case. These lights indicate the earbuds’ status, such as battery level and pairing mode.
  4. User Manual: Don’t forget to check the user manual that came with your earbuds. It’s like your secret handbook to unlocking all the cool features and functions of your Soundcore earbuds.

Now that you’ve acquainted yourself with the basics, let’s move on to the exciting part – pairing your earbuds!

Get to Know Your Soundcore Earbuds

Pair Your Soundcore Earbuds with a Smartphone

Pairing your Soundcore earbuds with your smartphone is a breeze. Here’s a step-by-step guide:

Step 1: Prepare Your Earbuds

First, make sure your Soundcore earbuds are fully charged. Place them in the charging case and ensure the case has some charge as well.

Step 2: Enable Bluetooth on Your Smartphone

Go to your smartphone’s settings and turn on Bluetooth. It’s usually found in the “Connections” or “Network” section, depending on your device’s operating system.

Step 3: Put Your Earbuds in Pairing Mode

Now, it’s time to put your earbuds in pairing mode. Here’s how:

  • Take the earbuds out of the charging case.
  • Check the user manual for your specific model to find out how to activate pairing mode. It may involve holding down the power button for a few seconds or following a specific sequence of button presses.

Step 4: Connect on Your Smartphone

Once your earbuds are in pairing mode, you should see them appear in the list of available devices on your smartphone’s Bluetooth settings. Tap on the Soundcore earbuds to connect.

Step 5: Confirm Connection

Your smartphone will confirm the connection, and you’ll hear a chime or see a notification on your device. Congratulations! Your Soundcore earbuds are now successfully paired with your smartphone.

Step 6: Test Your Connection

To ensure everything is working as it should, play some music or a video on your smartphone. You should hear the audio through your Soundcore earbuds. If not, check the earbuds’ volume and your smartphone’s output settings.

Pairing with Other Devices

Pairing your Soundcore earbuds with devices other than your smartphone is also straightforward. Here are the general steps for pairing with different types of devices:

Pairing with a Laptop or PC:

  1. Make sure your earbuds are charged.
  2. Turn on Bluetooth on your computer.
  3. Put your earbuds in pairing mode (refer to the user manual).
  4. Look for available devices on your computer’s Bluetooth settings and select your Soundcore earbuds.
  5. Confirm the connection and start enjoying wireless audio on your computer.

Pairing with a Tablet:

  1. Charge your earbuds.
  2. Activate Bluetooth on your tablet.
  3. Place your earbuds in pairing mode.
  4. Find your Soundcore earbuds in the list of available devices and tap to connect.
  5. Verify the connection, and you’re ready to enjoy music or videos on your tablet.

Pairing with a Smart TV:

  1. Ensure your earbuds are charged.
  2. Access the TV’s settings menu and navigate to the Bluetooth section.
  3. Activate pairing mode on your earbuds.
  4. Locate your Soundcore earbuds in the list of discoverable devices on your TV.
  5. Confirm the connection, and you can now enjoy a personalized audio experience without disturbing others.

Pairing with a Gaming Console:

  1. Charge your earbuds.
  2. On your gaming console, navigate to the Bluetooth or audio settings.
  3. Put your earbuds in pairing mode.
  4. Search for available devices and select your Soundcore earbuds.
  5. Confirm the connection and dive into an immersive gaming experience with crisp audio.

Troubleshooting Common Pairing Issues

Sometimes, even the most straightforward processes can encounter hiccups. If you face any issues while trying to pair your Soundcore earbuds, don’t worry! Here are some common problems and their solutions:

Problem 1: Earbuds Won’t Enter Pairing Mode

If your earbuds refuse to enter pairing mode, it could be due to low battery or a specific button sequence required. Ensure your earbuds are adequately charged and consult the user manual for the correct pairing procedure.

Problem 2: Earbuds Don’t Appear in Bluetooth Devices List

If your Soundcore earbuds don’t show up when you’re scanning for devices, try the following:

  • Make sure the earbuds are in pairing mode.
  • Check if they are already paired with another device. If so, disconnect them from the previous device before attempting to pair with a new one.
  • Restart Bluetooth on your device and try scanning again.

Problem 3: Connection Keeps Dropping

If your earbuds keep disconnecting from your device, here’s what you can do:

  • Ensure that your earbuds are within the Bluetooth range of your device (usually around 30 feet or 10 meters).
  • Check for interference from other electronic devices or walls that might weaken the Bluetooth signal.
  • Make sure your earbuds’ firmware is up-to-date as manufacturers often release updates to improve connectivity.

Problem 4: No Audio or Low Volume

If you’re not getting any sound or the volume is too low, follow these steps:

  • Confirm that your Soundcore earbuds are the selected audio output device on your connected device.
  • Check the earbuds’ volume settings using the physical controls or the companion app if available.
  • Ensure there are no obstructions or debris in the earbuds’ speaker grills.

Problem 5: One Earbud Isn’t Working

If one of your earbuds isn’t producing sound, try the following:

  • Clean the earbuds’ speaker grills gently with a soft, dry brush to remove any dirt or debris.
  • Check if the earbud is properly seated in the charging case and charging.
  • If the problem persists, contact Soundcore customer support for assistance.

Advanced Features and Tips

Advanced Features and Tips

Now that you’ve successfully paired your Soundcore earbuds let’s explore some advanced features and tips to enhance your wireless audio experience:

  1. Customize Controls: Some Soundcore models allow you to customize the touch controls through a companion app. You can assign functions like play/pause, skip tracks, or activate voice assistants according to your preferences.
  2. Equalizer Settings: Many Soundcore earbuds come with adjustable equalizer settings in the app, allowing you to fine-tune the audio to your liking. Experiment with different presets or create your custom equalizer profiles.
  3. Voice Assistant Integration: You can often activate your smartphone’s voice assistant (like Siri or Google Assistant) by tapping or holding down on one of the earbuds. This is super convenient for hands-free tasks.
  4. Battery Management: Keep an eye on your earbuds’ battery levels through your smartphone’s Bluetooth settings or the companion app. Most models also have LED indicators on the case to show the charge status.
  5. Find My Earbuds: Some Soundcore earbuds support a “Find My Earbuds” feature in the companion app. It helps you locate your misplaced earbuds by making them emit a sound.
  6. Firmware Updates: Periodically check for firmware updates for your earbuds. These updates can improve performance, fix bugs, and introduce new features.
  7. Proper Cleaning: To maintain audio quality, clean your earbuds regularly. Use a soft, dry brush to remove dust and debris from the speaker grills. Avoid using liquid cleaners.

Frequently Asked Questions (FAQs)

FAQ 1: Can I pair my Soundcore earbuds with multiple devices simultaneously?

Most Soundcore earbuds support multipoint pairing, which allows you to connect them to multiple devices at once. However, only one device can play audio at a time. If you want to switch between devices, pause playback on one and play on the other.

FAQ 2: How do I reset my Soundcore earbuds to factory settings?

To reset your Soundcore earbuds, follow these general steps:

  • Place the earbuds in the charging case.
  • Keep the case open and press and hold the button(s) on both earbuds for about 10 seconds until the LED indicators flash white and red.

Keep in mind that the exact reset procedure may vary by model, so consult your user manual for specific instructions.

FAQ 3: Can I use just one earbud at a time?

Yes, you can use a single Soundcore earbud independently. Simply take one earbud out of the case, put it in your ear, and connect it to your device. This is handy when you want to stay aware of your surroundings or conserve battery life.

FAQ 4: How long does it take to charge Soundcore earbuds fully?

Charging times vary depending on the model and battery capacity of your Soundcore earbuds. On average, it takes about 1 to 2 hours to fully charge the earbuds in their charging case.

FAQ 5: Are Soundcore earbuds sweat or waterproof?

Many Soundcore earbuds are designed to be sweat and water-resistant, making them suitable for workouts and outdoor activities. However, the level of water resistance can vary by model, so check the product specifications to ensure they meet your needs.


Congratulations! You’ve successfully paired your Soundcore earbuds with your favorite devices, explored some advanced features, and learned how to troubleshoot common issues. You’re now ready to enjoy your wireless audio experience to the fullest.

Earbuds that look like earplugs offer a hidden solution for discreet listening, providing a seamless pairing process when ensured they are charged, following specific instructions, and keeping Bluetooth settings handy; with a little patience and practice, you’ll be rocking out to your favorite tunes and enjoying crystal-clear calls in no time.

So, go ahead, put on your Soundcore earbuds, and let the music transport you to a world of pure audio bliss!

Happy listening!